How to use an Irrigation Pump During Endoscope Procedures

06/07/2021
image

Irrigation of the operating site is a very important element of any endoscopic procudure.

It assures good visibility and clean operating site;

reduces tissue adhesion on endoscopic instruments;

irrigation using saline solution increases tissue conductivity – faster electrosurgical effects;

quick and easy fluid flow adjustment from the pump control panel;

microprocessor control of fluid flow;

low-noise, does not cause nuisance in the procedure room;

small size and possibility of mounting of the device on the your trolleys gives easy access to the pump during the procedure.

It irrigates through the auxiliary water jet or biopsy channel to improve procedural visibility:

Less discomfort, pain and bloating;

Shorter recovery times;

Reduction of gas distension;

Faster absorption than ambient air.

In endoscopic procedures, the operation site may be contaminated with chime or blood residue in the gastrointestinal tract.

The CR endoscopic irrigation pump (BT600M) was designed to ensure full comfort and safety during surgeries.

The pump makes it possible to quickly rinse the gastrointestinal tract using physiological saline directly through the endoscopes rinsing opening or by using endoscopic instruments.

technical data

nominal voltage : 220-240V AC

power supply frequency : 50/60 Hz

rated power : 40VA

pump type : 3-roller peristaltic pump

max flow rate: 2280ml/min

图片无替代文字

Key Benefits

  • Irrigation via the instrument or water channel: The CR endoscopic irrigation pump (BT600M) can irrigate fluid via the instrument or auxiliary water channels of endoscopes, allowing gastric and colonic mucosa to be washed during procedures.
  • Powerful and controlled flow rate: A powerful flow allows organic material to be washed away efficiently while precise microprocessor controls prevent over pressurization of endoscopes.
  • Rapid fluid filling for EUS: The CR endoscopic irrigation pump (BT600M) is able to rapidly fill organs with fluid, allowing endoscopic ultrasound procedures to be performed.
  • Remote control or foot switch operation: The CR endoscopic irrigation pump (BT600M) can be controlled via a remote control or a foot switch, allowing the user to choose the method that suits the procedure best.

Application Photos:

图片无替代文字

图片无替代文字



Back to list